20 Things That Only The Most Devoted Ghost Vehicle Immobiliser Fans Understand

20 Things That Only The Most Devoted Ghost Vehicle Immobiliser Fans Understand

Protect Your Vehicle With a Ghost Vehicle Immobiliser

Ghost immobilisers act as a guardian in silence against car thieves, protecting your pride and joy without requiring an additional key. These systems aren't detected by radio scanners and are weatherproof.

Both Autowatch Phantom and CAN Phantom come with a PIN code emergency override which can be used in the event that the device is removed from the vehicle. The devices have been certified by TASSA (Tracking and Aftermarket Security System Association). They may lower the cost of insurance.

Protects your vehicle from key cloning and ECU swapping

With car theft increasing, it's important to make sure your vehicle is protected against determined criminals who constantly develop new methods to evade security systems. This could include cutting wires, using diagnostic scan tools or copying key fobs. One of the most effective methods to accomplish this is to have a  ghost vehicle immobiliser  fitted.

This device is so effective because it doesn't need an alarm or keyfob to work. It connects with your ECU and CAN network to prevent the car from beginning. This makes it much more difficult for thieves even if they have your keys to steal your vehicle.

The system works by using buttons that are already on your steering wheel or the centre console or door panels to generate a pin code sequence that you can personalize (which can be up to 20 presses) which must be completed before the car can start. The code is unique to you and can be changed at anytime, making it impossible for thieves to figure it out or decode it.

You can also add a service mode your pin code that will allow you to start your car and drive it without the need for a PIN code. This can be used in a situation of emergency, such as when your car needs to be serviced or taken to the garage.



Another benefit of the system is that it can be integrated with an automated call that alerts you when your vehicle has been tampered with or stolen. This is able to send an text or email message and is able to be connected to GPS tracking devices.

Some thieves have used jamming devices, or spoofing, to bypass the Ghost system. However, this can be easily thwarted by modern anti-jamming technologies and a constant monitoring of your vehicle.

It detects any tampering

The Ghost is designed to be hidden in the wiring loom of your vehicle and makes it difficult for thieves to spot. It connects to the vehicle's CAN network to stop key cloning or ECU swapping. However it is not detected by using keyfobs or LED indicators. It is also tamper-proof and cannot be altered with wire cutters or other tools. Its small size makes it easy to put anywhere in the car, including inside the engine. It can be connected with a GPS tracker to give an extra layer of security.

It also can detect other car immobilisers, or altering, so that thieves won't be forced to wait a bit longer to take your vehicle. This makes it a very effective tool in the fight against vehicle theft, especially for high-value vehicles that require expensive modifications. It can be linked to an iPhone app that will allow you to arm and disarm the device from a distance. You can also receive call alerts when someone tries to take over or steal your vehicle.

Many drivers opt to install an immobiliser ghost their vehicle due to the additional security it provides. It can stop key cloning, ECU swapping, and even relay attacks. It can be paired with a GPS tracker to enhance its effectiveness. The system can also be set to shut down the engine of your vehicle if it is moved from its normal position.

Some drivers have reported issues with their stop/start function after installing the Ghost. However, these cases are usually isolated and don't necessarily indicate that there is an issue with the immobiliser. However, it is crucial to ensure that the device has been installed by a reputable company and that it is compatible with your vehicle prior to buying.

The TASSA ghost II immobiliser is the newest in security for vehicles can safeguard your vehicle against key cloning or ECU swapping. It is able to be linked with an iPhone application, which allows you to arm or disarm the device remotely and monitor your vehicle's status. It comes with a five-year warranty and can be connected to your insurance policy to provide you with more peace of mind.

Detects relay attacks

There are many security solutions that can be used to prevent theft of vehicles. Specialised locks or tracking devices, as well as  ghost immobilisers   are all available. These devices detect the signal from the key fob, and block the engine from starting until the PIN code is entered. They also protect the vehicle from hacking and cloning and are a reliable security measure against determined thieves. However, there are a number of ways that thieves attempt to circumvent these systems.

Relay attacks are a common method to disable immobilisers on vehicles. This method involves two thieves working together. One of them stands near the car, holding a device which can pick the signal from the key fob. The signal is then relayed to a device held near the engine control unit. This tricked the system into thinking that the key fob was near which allowed thieves to start their vehicle.

The Autowatch Ghost Immobiliser is a CAN-based, advanced system, is designed to block these kinds of attacks. It seamlessly integrates with the OEM security system. It works with CAN (Controller Area Network) the system of the vehicle for controlling the vehicle. It works with the majority of vehicles and works silently to stop ECU hacking key cloning, key hacking, and vehicle theft. It also offers a cost-effective alternative to replacing the security system originally installed.

Unlike other security devices, unlike other security devices, Ghost Immobiliser does not use LED indicators or key-fobs. It is instead installed in the wiring of the vehicle, making it impossible for thieves to recognize. It is also tamper-proof and will not activate unless it receives a specific PIN code from the vehicle's owner. This makes it a good option to shield vehicles from ECU hacking and the possibility of cloning.

Choosing between the Ghost Immobiliser and the Relay Immobiliser depends on your personal preferences and the degree of security you'd like to have for your vehicle. The Ghost Immobiliser offers high security and is undetectable. the Relay Immobiliser is a more simple installation but some vulnerabilities. The final decision is up to you and your requirements however both are an excellent option for safeguarding your vehicle against theft.

Detects CAN bypass

The Autowatch Ghost immobiliser is a market-leading device that protects vehicles from key cloning, hacking and ECU swapping. The device is able to hide from thieves by using the vehicle's CAN network, and doesn't require additional wiring. It does not emit any signals which can be detected by scanning technology. This makes it a powerful tool for modern-day theft techniques. It can be paired with GPS tracking devices and physical locks to provide a strong defense against theft.

The Ghost is a highly advanced immobiliser that can be used to protect the most expensive vehicles. It prevents the vehicle from starting until a different PIN code is entered along with the standard key fob. This makes it more difficult for thieves to steal the vehicle, and may even deter them. This is particularly beneficial for vehicles that have been custom-built or are expensive models.

It is compatible with various vehicles from the major manufacturers and is compatible with most aftermarket components. The device is installed by a professional and is typically concealed in the engine bay or under the bonnet of the car. It is weatherproof and does not require any modifications to the vehicle's signalling or wiring systems. It's the perfect choice for protecting your car's most precious possessions.

One of the biggest advantages of the Ghost is that it can be switched to valet mode, so you can drive your vehicle while it is being serviced or towing away to be repaired. This can be accomplished with a pin code or an override driver fob you carry in your vehicle. It is easy to change back to normal mode in the event that you need to start your car again.

Another advantage of the Ghost is that it can't be detected by diagnostic tools or listened with an Stethoscope. The Ghost does not emit radio frequency signals, as other security systems do. It uses the CAN data network of the vehicle to stop the engine from running and can only be started with an individual PIN code.